What’s in the Box?

When you initially open the KoalaSafe box, you should see the following items:

  • KoalaSafe device
  • Ethernet cable
  • Power Adapter
    • Input: 100-240V 50/60Hz 0.35A
    • Output: 5V 1000mA
  • micro-USB power cable
  • Quick Start Guide

The KoalaSafe


../_images/unit.png

  1. WAN port – The Ethernet cable is plugged into this port to connect to a LAN port on your home router.
  2. LAN port – A switch or computer can be connected to this port via an Ethernet cable. It offers the same protection as devices connected via WiFi.
  3. Power port – The micro-USB power cable is plugged into this port.
  1. Reset button – Pressing this button will restart the KoalaSafe which takes around 60 seconds.
  1. Ventilation – This is used for ventilation ONLY.

The following are reserved for future use and currently do not perform any function

  1. USB port – This is designed for future use.
  1. Switch – This is designed for future use.

Lights

The 3 lights on the KoalaSafe will flash different patterns to indicate the current state of the device. For more information visit the interactive light simulator.